-
32 Amps, 240V, 7.6kw, Level 2 Home EV Charging Station. Easy to use, do not need an APP to run it or home network connection.
-
The charging current depends more on your electric car. If your car can charge up to 7.6kw, the natural display will show 32 amps.
-
The station uses aluminum alloy body and PC alloy plate to be stronger. And it reaches the IK collision protection level 10, which means it can carry the weight of the car. Button start mode and easy installation.
-
Large LCD to display all the car's data on the charging station during charging. You can see the state of charge, including current, voltage and temperature. The screws are fit into the box so you don't have to worry about the screen falling. The 20ft cable leaves enough space between your car and the charging station.
-
High compatibility. It can charge all EVs manufactured in Europe, correctly and effectively.
-
Easy to install. Products are sent to clients with associated installation tools.
-
Containing the intelligent chip. It can automatically repair minor charging problems while charging. When a fault occurs, the lights will blink in different ways to indicate different problems.
-
This EV charging station is special for home use. It doesn't have the billing function.
If you have no experience in installing electrical equipment, please contact the local electrician for assistance.
-
Mode: C (with type 2 cable)
-
Certificate: TUV, CE
-
Current: 32A 1 phase
-
Power: 7.6kw
-
Size: 43*26*26 (cm)
-
Weight: 6.1kg
-
Installation Method: Wall/Stand
-
Applicable standard: IEC62196(Type 2)
-
Certificate: TUV, CE, FCC, CSA
-
IP Rating: IP66
-
Rated Voltage: 230V AC土10%
-
Rated Current: 32A
-
Maximum Power: 7.68KW
-
Phase Mode: Single Phase
-
Operating Temperature: -40°C to +70°C
-
Enclosure Material: ABS+PC alloy
-
Length Of Cable: 25Ft /7.6m
-
Diameter the electric wire: 3G6mm²+0.5mm²
-
Start Mode: Button(default)
-
EV charger *1
-
User manual *1
-
Installation drawing *1
-
Setscrew *4
-
Metal backboard *1
-
Key *2
Type 2 suitable for EV as below:
AUDI: Q7 E-Tron, A3 E-Tron, E-Tron Quattro, E-Tron Sportback
RENAULT: Zoe, Zoe 2013, Kangoo ZE 2014-2019
BMW: i3, i8, 94AH 3Rex, 2 Series, 530e, 225xe, 330e, 740e, XS
TESLA: X, S, 3 with J1772/62196 adapter which does not included in this product
KIA: Niro, Niro Phev, Optima Phev.
MERCEDES-BENZ: B Class E-Cell, GLE 500e, E 350e, S500 PHEV, EQC 400, SLS EV, EQA, Vito E -Cell Van
PORSCHE: 918 Spyder, Taycan-Mission E, Cayenne, Panamera S PHEV, Panamera 4 EHybrid
VOLKSWAGEN: E-Up, E-Golf, Golf GTE PHEV, Golf 1.4 TSE, Passat GTE, I.D
VOLVO: S90, V90 T8, VGO PHEV, XC90 T8
HYUNDAL: Loniq Electric, Loniq Plug-In, Kona
MINI S E Countryman 2017. RANGE ROVER P400e. RIMAC Concept One.
BYD E6. MORGAN EV. JAGUAR i-Pace. MAHINDRA E20. NISSAN Leaf 2018.
TOYOTA Prius Plug-In-Hybrid 2018...
CAUTIONS:
1. Failure to follow instructions may result in danger.
2. Children are prohibited from touching charging station.
3. Do not dissemble the charging station while it's operating.
4. Install a charging station away from pyrotechnics, dusty or corrosive places
5. Only use the charging station when it's normally operating and please strictly follow the instructions.
6. The charging station produces high voltage output. You must pay attention to personal safety when using it.
7. If malfunction happens, it may cause electric shock or even death. Under emergency situations, you can cut off the power supply.
ABOUT MAINTENANCE:
In order to ensure the normal service life of the charging station and reduce risk, maintenance must be performed within the specified time. The maintenance of the equipment must be completed by professionals with qualified and safe maintenance tools.
The product is already packed in factory. During transportation, strong impact and bumps should be avoided to avoid damage to the outer packaging of the product.
The product should be placed at an ambient temperature of -40°(- + 70°C with a relative humidity of no more than 95%. The air should not contain acids, alkalis or other corrosive gases and explosive gases.
